Numerical control sawing machine is sharp slideway installs a requirement

  • Time:
  • Click:146
  • source:GERMAN CNC Machining
One, sawing machine of equipment numerical control is necessary to eradicate before linear slideway the Mao Bian of face of device of dragon door square column, contamination and exterior bruise. Use please before equipment clean oil kind will after datum plane is abluent again equipment, after will antirust oil is normally eradicative, the main shaft with the inferior viscosity on daub uses lubricating oil. 2, will advocate course is arranged sadly go up in square column of door of dragon of numerical control sawing machine, apply side direction to secure screw or other and fixed treat make line course and face of side direction equipment sadly joint. Before equipment is applied, should confess screw aperture agrees, need to accomplish screw aperture to agree only, talent assures to combine precision and apply quality. 3, the fixed position screw that the center presses slippery course of general of one after another to both ends comes back a little close, make orbit and perpendicular equipment face a little joint. One after another is by central azimuth preliminary tighten to bicephalous approach can get more smooth and steady precision. Perpendicular datum plane comes back a little after tightening, enhance the locking power of side direction datum plane, make advocate course is possible truly datum plane of joint side direction. Use torsional wrench, according to all sorts of material locking torque will be slippery the fixed position screw of course comes back gradually close. 4, use sawing machine of numerical control of equipment of same equipment method linear deputy course. CNC Milling